Request a quotePower and MEP products
Built to your specification, under our name, our responsibility and our insurance, and delivered across the UK and Europe. Installation and commissioning only if you want them.
Every product we build, in one diagram.
Point at any part of the system to see what we build there. Power flows in amber, the liquid cooling loop in blue.
Interactive diagram of power distribution and liquid cooling for a data hall.
Presented by our founder, a real person. Video produced with AI. Full transcript alongside.
Built to your specification.
Every product we sell is built to your specification, under our name, our responsibility and our insurance.
LV switchboards, remote power panels, E-Houses, power skids, transformers, control panels and liquid cooling, designed around your project.
Each one is factory tested before it ships, and arrives with its test report and certificates. You can witness the test in person or remotely.
Send us your drawings or specification, and receive a price and a delivery date within 48 hours.
Configure and request a quoteBuilt to your ratings, your layout and your standards.
Each product is designed around your project and built under our name, our responsibility and our insurance. Product drawings below are diagrams, not photographs.
LV switchboards
Main and sub-distribution boards, ATS, generator synchronisation, power factor correction and active harmonic filtering.
Remote power panels and PDUs
Power distribution in the data hall, with branch circuit monitoring and panel layouts configured to your racks.
PLC, MCC and BMS control panels
Control panels for automation, motor control, monitoring and plant integration.
E-Houses and E-Pods
Prefabricated electrical rooms with the MV and LV equipment, UPS, HVAC and fire suppression your project needs, built and tested off site.
Power skids
Power equipment assembled on a skid and tested before it ships, so less work is done on site.
Transformers and compact substations
Transformers sized to your load, for indoor or outdoor installation, to the requirements of your network operator.
DLC manifolds
Manifolds designed to your rack layout, flow and temperatures, cleaned and pressure tested before they ship.
TCS secondary loop
The pipework between the CDU and the racks, with the valves, strainers, fill and drain points the loop needs.
Rear door heat exchangers
Cooling at the back of the rack, connected to the same water system and sized to the heat your racks reject.
Pump skids and booster sets
Pumps, pipework, valves and controls assembled on a skid and tested before it ships.
EV charging and battery storage
Chargers, batteries and the power equipment behind them, from one home to a fleet depot or a grid-scale site.
Something not on this list
Tell us the problem, not the product. We design and build to your site and your process.
Nothing leaves the factory untested.
A fault found in the factory is fixed before it reaches your site. So every product is tested before it ships.
Commissioning L1 to L5- Drawings approvedYou approve the drawings before anything is built.
- Built to your specificationWith internationally known components, CE or UKCA marked as required.
- Routine verificationLV assemblies are verified to BS EN 61439. Liquid cooling assemblies are cleaned and pressure tested.
- Witnessed if you wantYou can witness the factory test in person or remotely.
- Test report with deliveryEvery product ships with its test report and certificates.
Labour availability is now the main driver of construction cost increases. Every hour of work done in the factory is an hour your site team does not need.
of UK respondents report shortages of qualified mechanical, electrical and plumbing workers.
of 112 markets say contractor capacity for data centre projects is tightening or already overstretched.
Switchboards, RPPs, skids and E-Houses arrive assembled, factory tested and documented, ready to install and connect.
Source: Turner and Townsend, Global Construction Market Intelligence 2026 (August 2026).
What we will ask you for.
No full specification yet? Send what you have. A short brief is enough to start.
LV distribution board
- Incoming supply: current, voltage, phases
- Fault level (kA) and form of separation
- Outgoing ways and ratings, MCCB or ACB
- Metering, IP rating, indoor or outdoor
- Delivery country and required date
E-House or power skid
- MV and LV scope
- Transformer rating
- Included equipment: switchgear, UPS, HVAC, fire suppression
- Dimensions and transport limits
- Site location
Transformer
- Rating (kVA)
- Primary and secondary voltage
- Cooling type and Ecodesign tier
- Indoor or outdoor
- Network operator requirements
DLC manifold or TCS loop
- Rack layout and number of racks
- Flow rate and temperatures
- Pipe sizes and connection types
- Fluid, for example PG25 or water
- Valves you need: isolation, balancing, control
Presented by our founder, a real person. Video produced with AI. Full transcript alongside.
What you get at handover, and how you follow your order
You always know where your order is.
Drawings approved, in manufacture, factory test, dispatched, delivered. You see every stage.
At handover you get the factory test report, the drawings, commissioning tags in your colour scheme, records in your digital system, and digital product data for your digital twin.
Nothing to chase.
Every stage, visible to you.
Each order is tracked by stage, so you never have to chase an update.
- Drawings approved: you approve before we build
- In manufacture: built to your specification
- Factory test: tested before it ships
- Dispatched: on the date in writing
- Delivered: with your handover pack
Animation of the order stages.
Designed to your requirements. Built, delivered and installed.
Design to your specification
Your ratings, layout, standards and site limits.
Manufacture
Built to our specification with internationally known components, under our name, our responsibility and our insurance. CE or UKCA marking as required.
Deliver
Anywhere, on a delivery date confirmed in writing before you order.
Install and commission
Optional, by our managed site teams, L1 to L5.
Questions buyers ask
Do you build to our specification or sell standard products?
To your specification. Every product is designed around your ratings, layout, standards and site limits, and built under our name, our responsibility and our insurance.
How quickly will you reply and give a price?
We contact you within one working day, and the same day on WhatsApp. You receive a price and a delivery date within 48 hours of receiving the information we need.
Do we have to buy installation from you?
No. You can buy supply only and use your own contractor. Installation and commissioning are available only if you want them.
Do your products comply with the standards?
Yes. Products are built and tested to ISO, IEC and all standards that apply to your project, and are delivered in full accordance with your requirements. Certificates and technical data are provided on request.
Can we follow our order?
Yes. Every order has tracking by stage: drawings approved, in manufacture, factory test, dispatched and delivered.
What do we receive at handover?
Factory test reports, drawings, colour coded commissioning tags to your scheme, records entered into your digital system where you have one, and digital product data for your digital twin.
Where do you deliver?
Across the UK and Europe. Other regions on request.
Tell us what to build.
Choose a product or service. We reply with a structured proposal and a confirmed delivery date, not an instant price.