Request a quoteFactories, hospitals, schools and data centres
From the main switchboard to the final distribution board, every panel is built to your ratings, layout and standards.
Product animation for illustration.
Remote power panels for AI data halls, in weeks.
AI halls need more power per rack, and they need it now. We build remote power panels to your specification and confirm the delivery date in writing before you order.
- Your input rating, circuits and breaker types
- A and B feeds, branch circuit monitoring
- Factory tested before it ships, with a witnessed test if you want it
- Supply only, or supply and install
Presented by our founder, a real person. Video produced with AI. Full transcript alongside.
RPPs for AI data halls
AI halls need more power per rack, and they need it now. Large manufacturers are full.
We build remote power panels to your specification: your input rating, your circuits, A and B feeds, and branch circuit monitoring.
Delivery in weeks, not months, with the date confirmed in writing before you order. Every panel is tested at the factory before it ships, and you can witness the test.
Send us your rack layout and the power per rack.
Choose a building type.
See the typical range for each kind of building. Every panel is designed to your specification.
Main LV switchboard
Incoming supply and main distribution for the whole site.
- ACB or MCCB incomers
- Forms of separation 1 to 4
- Metering and power monitoring
- IEC 61439-2
Sub-distribution board
Distribution to floors, plant rooms and production areas.
- MCCB outgoing ways
- Floor or wall standing
- Metering per circuit
- IEC 61439-2
Final distribution board
Lighting and small power circuits in every area.
- Single or three phase
- MCB and RCBO ways
- Surge protection
- IEC 61439-3
Remote power panel (RPP)
Branch circuit distribution next to the racks.
- A and B feeds
- Branch circuit monitoring
- Compact footprint
- IEC 61439-2
Motor control centre (MCC)
Starters and drives for pumps, fans and process motors.
- DOL, star-delta and VSD
- Withdrawable or fixed
- PLC and BMS interface
- IEC 61439-2
Medical IT panel
Isolated power for operating theatres and critical care.
- Isolating transformer
- Insulation monitoring
- Remote alarm panel
- BS 7671 section 710
ATS and generator panel
Automatic changeover between mains and standby generator.
- Open or closed transition
- Generator start and sync
- Load shedding
- IEC 60947-6-1
Typical arrangements shown as drawings. Every panel is designed to your specification.
See what each form of separation means.
The form of internal separation decides what stays live when you work on one circuit. Choose a form to see where the barriers go.
Interactive diagram of the forms of internal separation in a switchboard.
Verified twice: once by design, once on every board.
Routine verification
Each switchboard we ship is checked before it leaves: construction, wiring, clearances, protective circuit continuity, dielectric test and mechanical operation, with the results in the test report.
Design verification
The switchboard system is design verified to BS EN 61439, including temperature rise and short circuit withstand, so the ratings on the nameplate are proven, not estimated.
Ratings you can check
Rated current, rated voltage, short circuit withstand, IP rating and form of separation, stated on the nameplate and in the documents you receive.
LV distribution board: what we will ask you for
- Incoming supply: current, voltage, phases
- Fault level (kA) and form of separation
- Outgoing ways and ratings, MCCB or ACB
- Metering, IP rating, indoor or outdoor
- Delivery country and required date
Final distribution board: what we will ask you for
- Single or three phase, incoming rating
- Number of ways and MCB or RCBO types
- Surface or flush mounting, IP rating
- Surge protection and metering
- Quantity and required date
Medical IT panel: what we will ask you for
- Number of theatres or bed spaces
- Transformer rating (kVA)
- Number of outgoing circuits
- Remote alarm panel locations
- Required date
Questions buyers ask
Which form of separation do we need?
It depends on how much of the board must stay live during maintenance and on your specification. Form 4b gives the most separation, but costs more and takes more space. Tell us how the board will be operated and maintained and we will recommend a form.
What standard are your switchboards built to?
IEC 61439, with design verification and routine verification for every assembly. BS 7671 applies to the installation in the UK.
How fast can you deliver remote power panels for AI data halls?
In weeks, not months, with the delivery date confirmed in writing before you order.
Can we witness the factory acceptance test?
Yes. You can attend in person or follow the test remotely, and you receive the report before dispatch.
Do we have to buy installation from you?
No. You can buy supply only and use your own contractor. Installation and commissioning are available only if you want them.
Need a panel that is not listed?
We build to your ratings, layout and standards, including control panels, ATS and generator panels and medical IT panels.